[Xymon] clientconfig.cfg not getting updated

Colin Coe colin.coe at gmail.com
Wed Dec 16 00:29:22 CET 2015


Hi all

Where the logs say that it is download the client config from the server
and reports the below, it is actually lying:
---
2015-12-15 20:07:00  eventlog:security ignore success ignore Success ignore
"The local computer may not have the necessary registry information or
message DLL files to display messages from a remote computer"
eventlog:system ignore "Contact the administrator to install the driver
before you log in again" tssessions adreplicaton
---

This is not what is in /etc/xymon/client-local/cfg (the correct path for
the RPMs from JC).

What I have just noticed is that if I run 'xymon xxx.xx.106.11 "config
client-local.cfg" | wc -c' I get 4931.  (Obviously this is from a RHEL
client)

When I source XymonSend.ps1 (from a Windows client running v2.04) and run
'xymonsend "config client-local.cfg" xxx.xx.106.11 >
c:\test-client-local.txt' and then "dir" the file, I see that it is 9868
bytes in size.

I've then copied the file to a RHEL host and run "cat -v
test-client-local.txt" and the result is (end of file only shown):
^@[^@i^@r^@i^@x^@]^@
^@l^@o^@g^@:^@/^@v^@a^@r^@/^@a^@d^@m^@/^@S^@Y^@S^@L^@O^@G^@:^@1^@0^@2^@4^@0^@0^@0^@
^@
^@[^@d^@a^@r^@w^@i^@n^@]^@
^@l^@o^@g^@:^@/^@v^@a^@r^@/^@l^@o^@g^@/^@s^@y^@s^@t^@e^@m^@.^@l^@o^@g^@:^@1^@0^@2^@4^@0^@0^@0^@
^@
^@[^@s^@c^@o^@_^@s^@v^@]^@
^@l^@o^@g^@:^@/^@v^@a^@r^@/^@a^@d^@m^@/^@s^@y^@s^@l^@o^@g^@:^@1^@0^@2^@4^@0^@0^@0^@
^@
^@[^@p^@o^@w^@e^@r^@s^@h^@e^@l^@l^@]^@
^@c^@l^@i^@e^@n^@t^@v^@e^@r^@s^@i^@o^@n^@:^@2^@.^@0^@4^@:^@h^@t^@t^@p^@:^@/^@/^@b^@e^@n^@m^@o^@n^@1^@p^@.^@s^@c^@a^@d^@a^@.^@h^@o^@r^@i^@z^@o^@n^@p^@o^@w^@e^@r^@.^@c^@o^@m^@.^@a^@u^@/^@p^@u^@b^@/^@
^@a^@d^@r^@e^@p^@l^@i^@c^@a^@t^@o^@n^@c^@h^@e^@c^@k^@
^@^M^@
^@

 Every character appears to be preceded by a ^@.

Weird

CC


On Tue, Dec 15, 2015 at 9:45 PM, <zak.beck at accenture.com> wrote:

> Hi
>
> The key part is this:
>
> 2015-12-15 20:06:59  Main and optional tests finished.
> 2015-12-15 20:06:59  Sending to server
> 2015-12-15 20:06:59  Connecting to host xxx.xx.106.11
> 2015-12-15 20:06:59  Sent 104860 bytes to server
> 2015-12-15 20:07:00  Received 309 bytes from server
> 2015-12-15 20:07:00  RepeatTests: nothing to do!
> 2015-12-15 20:07:00  Using new remote config, saving locally
> 2015-12-15 20:07:00  eventlog:security ignore success ignore Success
> ignore "The local computer may not have the necessary registry information
> or message DLL files to display messages from a remote computer"
> eventlog:system ignore "Contact the administrator to install the driver
> before you log in again" tssessions adreplicaton
> 2015-12-15 20:07:00  Found a command: eventlog:security
> 2015-12-15 20:07:00  Found a command: eventlog:system
>
> 2015-12-15 20:07:00  Received 309 bytes from server
>
> This is the client local config received from the server: 309 bytes.
>
> eventlog:security ignore success ignore Success ignore "The local computer
> may not have the necessary registry information or message DLL files to
> display messages from a remote computer" eventlog:system ignore "Contact
> the administrator to install the driver before you log in again" tssessions
> adreplicaton
>
> This happens to be 309 bytes +/- 1, so this appears to match what Xymon is
> sending you (differences will be carriage returns).
>
> I would think there must be a section on the server end that is sending
> this - maybe you have more than one client-local.cfg?
>
> Sorry, I'm not familiar with the redhat layout, is
> /etc/xymon/client-local.cfg the correct location? The manpage (
> https://www.xymon.com/help/manpages/man5/client-local.cfg.5.html) says
> ~xymon/server/etc/client-local.cfg.
>
> Zak Beck
>
>
> -----Original Message-----
> From: Colin Coe [mailto:colin.coe at gmail.com]
> Sent: 15 December 2015 12:11
> To: Beck, Zak <zak.beck at accenture.com>
> Cc: Brandon Dale <BDale at kitchengroup.com.au>; xymon at xymon.com
> Subject: Re: [Xymon] clientconfig.cfg not getting updated
>
> The log file has:
> ---
> benadm02 - : xymonclient.ps1  2.04 2015-12-02 zak.beck at accenture.com
> 2015-12-15 20:06:57  UTC date/time: 2015-12-15 12:06:57
> 2015-12-15 20:06:57  This is collection number 12, loop count 1
> 2015-12-15 20:06:57  Next 'slow scan' is when loopcount reaches 5
> 2015-12-15 20:06:57  Executing XymonCollectInfo
> 2015-12-15 20:06:57  CleanXymonProcsCpu start
> 2015-12-15 20:06:57  DEBUG: cached process ids: 0, 4, 160, 224, 532, 536,
> 596, 604, 632, 684, 696, 704, 728, 760, 788, 892, 908, 916, 940, 964, 972,
> 1008, 1112, 1124, 1260, 1280, 1304, 1324, 1392, 1412, 1444, 1456, 1504,
> 1560, 1576, 1616, 1624, 1660, 1676, 1692, 1728, 1736, 1756, 1956, 2116,
> 2136, 2168, 2180, 2400, 2416, 2424, 2484, 2500, 2580, 2668, 2720, 2724,
> 2796, 2812, 2852, 2924, 2996, 3092, 3216, 3268, 3372, 3440, 3452, 3532,
> 3604, 3736, 3740, 3784, 3788, 3816, 3944, 3976, 3980, 3984, 3988, 4072,
> 4136, 4180, 4200, 4388, 4396, 4404, 4456, 4472, 4632, 4640, 4848, 4960,
> 4968, 4984, 5276, 5336, 5384, 5460, 5492, 5952, 5964, 6136, 6212, 6256,
> 6284, 6400, 6428, 6640, 6680, 6696, 6716, 6768, 6832, 6968, 7128, 7144,
> 7236, 7360, 7368, 7372, 7620, 7876, 7892, 7924, 7928, 8132, 8188, 8308,
> 8404, 8424, 8452, 8468, 8472, 8528, 8540, 8580, 8752, 8880, 8896, 8968,
> 9016, 9048, 9112, 9132, 9136, 9448, 9472, 9576, 9768, 9796, 9812, 9864,
> 9924, 10020, 10132
> 2015-12-15 20:06:57  CleanXymonProcsCpu finished.
> 2015-12-15 20:06:57  XymonCollectInfo: Process info
> 2015-12-15 20:06:57  XymonCollectInfo: calling XymonProcsCPUUtilisation
> 2015-12-15 20:06:57  New process 9544 detected: GoogleUpdate
> 2015-12-15 20:06:57  New process 9672 detected: GoogleUpdate
> 2015-12-15 20:06:57  XymonCollectInfo: CPU info (WMI)
> 2015-12-15 20:06:58  Found 1 CPUs, total of 1 cores
> 2015-12-15 20:06:58  XymonCollectInfo: OS info (including memory) (WMI)
> 2015-12-15 20:06:58  XymonCollectInfo: Service info (WMI)
> 2015-12-15 20:06:58  XymonCollectInfo: Disk info
> 2015-12-15 20:06:58  XymonCollectInfo: Building table of service processes
> (uses WMI data)
> 2015-12-15 20:06:58  XymonCollectInfo: Date processing (uses WMI data)
> 2015-12-15 20:06:58  XymonCollectInfo: Adding CPU usage etc to main
> process data
> 2015-12-15 20:06:58  XymonProcesses start
> 2015-12-15 20:06:59  XymonProcesses finished.
> 2015-12-15 20:06:59  XymonCollectInfo: calling UserSessionCount
> 2015-12-15 20:06:59  XymonCollectInfo finished
> 2015-12-15 20:06:59  Performing main and optional tests and building
> output...
> 2015-12-15 20:06:59  XymonCpu start
> 2015-12-15 20:06:59  XymonCpu finished.
> 2015-12-15 20:06:59  XymonDisk start
> 2015-12-15 20:06:59  XymonDisk finished.
> 2015-12-15 20:06:59  XymonMemory start
> 2015-12-15 20:06:59  XymonMemory finished.
> 2015-12-15 20:06:59  Event Log processing - max payload: 1024 - wanted
> logs: Application System Security
> 2015-12-15 20:06:59  Event log Application adding to payload
> 2015-12-15 20:06:59  Processing event log Application
> 2015-12-15 20:06:59  Log filter     <QueryList>
>       <Query Id="0" Path="Application">
>         <Select
> Path="Application">*[System[TimeCreated[timediff(@SystemTime) <=
> 3600000] and (Level=1 or Level=3 or Level=2 or Level=4 or Level=0 or
> Level=5)]]</Select>
>       </Query>
>     </QueryList>
> 2015-12-15 20:06:59  Setting thread/UI culture to en-US
> 2015-12-15 20:06:59  Resetting thread/UI culture to previous: en-AU / en-US
> 2015-12-15 20:06:59  Event log Application entries since last scan: 16
> 2015-12-15 20:06:59  Event log Security adding to payload
> 2015-12-15 20:06:59  Event log System adding to payload
> 2015-12-15 20:06:59  Event log processing finished
> 2015-12-15 20:06:59  XymonProcs start
> 2015-12-15 20:06:59  XymonProcs finished.
> 2015-12-15 20:06:59  XymonNetstat start
> 2015-12-15 20:06:59  XymonNetstat finished.
> 2015-12-15 20:06:59  XymonPorts start
> 2015-12-15 20:06:59  XymonPorts finished.
> 2015-12-15 20:06:59  XymonIpconfig start
> 2015-12-15 20:06:59  XymonIpconfig finished.
> 2015-12-15 20:06:59  XymonRoute start
> 2015-12-15 20:06:59  XymonRoute finished.
> 2015-12-15 20:06:59  XymonIfstat start
> 2015-12-15 20:06:59  wanted address families: InterNetwork
> 2015-12-15 20:06:59  XymonIfstat finished.
> 2015-12-15 20:06:59  XymonSvcs start
> 2015-12-15 20:06:59  XymonSvcs finished.
> 2015-12-15 20:06:59  XymonWho start
> 2015-12-15 20:06:59  XymonWho finished.
> 2015-12-15 20:06:59  XymonUsers start
> 2015-12-15 20:06:59  XymonUsers finished.
> 2015-12-15 20:06:59  Executing XymonServiceCheck
> 2015-12-15 20:06:59  Executing XymonDirSize
> 2015-12-15 20:06:59  Executing XymonDirTime
> 2015-12-15 20:06:59  Executing XymonTerminalServicesSessionsCheck
> 2015-12-15 20:06:59  Executing XymonActiveDirectoryReplicationCheck
> 2015-12-15 20:06:59  Executing XymonProcessRuntimeCheck
> 2015-12-15 20:06:59  XymonProcessRuntimeCheck finished
> 2015-12-15 20:06:59  Main and optional tests finished.
> 2015-12-15 20:06:59  Sending to server
> 2015-12-15 20:06:59  Connecting to host xxx.xx.106.11
> 2015-12-15 20:06:59  Sent 104860 bytes to server
> 2015-12-15 20:07:00  Received 309 bytes from server
> 2015-12-15 20:07:00  RepeatTests: nothing to do!
> 2015-12-15 20:07:00  Using new remote config, saving locally
> 2015-12-15 20:07:00  eventlog:security ignore success ignore Success
> ignore "The local computer may not have the necessary registry information
> or message DLL files to display messages from a remote computer"
> eventlog:system ignore "Contact the administrator to install the driver
> before you log in again" tssessions adreplicaton
> 2015-12-15 20:07:00  Found a command: eventlog:security
> 2015-12-15 20:07:00  Found a command: eventlog:system
> 2015-12-15 20:07:00  Cached config now contains:
> 2015-12-15 20:07:00  eventlog:system, eventlog:security
> 2015-12-15 20:07:00  Delaying until next run: 297.36133 seconds
> ---
>
> On Tue, Dec 15, 2015 at 8:00 PM,  <zak.beck at accenture.com> wrote:
> > Hi
> >
> > By default, XymonSend creates log entries like the following:
> >
> > 2015-12-15 11:55:11  Main and optional tests finished.
> > 2015-12-15 11:55:11  Sending to server
> > 2015-12-15 11:55:11  Connecting to host xxx.xxx.xxx.xxx
> > 2015-12-15 11:55:11  Sent 67442 bytes to server
> > 2015-12-15 11:55:12  Received 1555 bytes from server
> > 2015-12-15 11:55:12  RepeatTests: nothing to do!
> >
> > You may have more than one call to XymonSend depending on the tests
> specified, the one that fetches the client local config is the call
> directly after "Main and optional tests finished."
> >
> > You can see in the example above, we received 1555 bytes from the
> server. This is the client local config. Are you getting 0 back from all
> your calls to the server?
> >
> > Zak Beck
> >
> >
> > -----Original Message-----
> > From: Colin Coe [mailto:colin.coe at gmail.com]
> > Sent: 15 December 2015 11:29
> > To: Beck, Zak <zak.beck at accenture.com>
> > Cc: Brandon Dale <BDale at kitchengroup.com.au>; xymon at xymon.com
> > Subject: Re: [Xymon] clientconfig.cfg not getting updated
> >
> > HI all
> >
> > Yep, tried single server with the same result.  I've confirmed that the
> client-local.cfg file is the same on both servers.
> >
> > When I add debugging in "function XymonClientConfig($cfglines)", I see
> that $cfglines only contains what was already in the file.  I think the
> problem is that the client is not successfully downloading client-local.cfg
> from the server.
> >
> > Thanks
> >
> > On Tue, Dec 15, 2015 at 4:57 PM,  <zak.beck at accenture.com> wrote:
> >> Hi
> >>
> >>
> >>
> >> Your syntax for tssessions and adreplicaton is incorrect, but I would
> >> not expect this to stop the file updating.
> >>
> >>
> >>
> >> tssessions should be tssessions:<yellow>:<red> where <yellow> and
> >> <red> are the numbers of sessions free below which you will get the
> >> appropriate alert, e.g. tssessions:10:2
> >>
> >>
> >>
> >> adreplicaton should be adreplicationcheck.
> >>
> >>
> >>
> >> As you have two servers, is the config for client-local.cfg the same
> >> on both – I think we just take the last one connected to.
> >>
> >>
> >>
> >> You could try it with just one server and see what happens.
> >>
> >>
> >>
> >> Zak Beck
> >>
> >> From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Colin Coe
> >> Sent: 15 December 2015 07:17
> >>
> >>
> >> To: Brandon Dale <BDale at kitchengroup.com.au>
> >> Cc: xymon at xymon.com
> >> Subject: Re: [Xymon] clientconfig.cfg not getting updated
> >>
> >>
> >>
> >> Yep, did this but forgot to include it in the list of things tried.
> >>
> >>
> >>
> >> On Tue, Dec 15, 2015 at 3:15 PM, Brandon Dale
> >> <BDale at kitchengroup.com.au>
> >> wrote:
> >>
> >> Might be this <servers>xxx.xx.106.11 xxx.xx.176.11</servers>  then
> >>
> >> I know you can have more than 1 server here but I don’t know the
> >> syntax just double check this, maybe try with just a single server
> listed here.
> >>
> >>
> >>
> >> Regards,
> >>
> >>
> >>
> >> Brandon.
> >>
> >>
> >>
> >> From: Colin Coe [mailto:colin.coe at gmail.com]
> >> Sent: Tuesday, 15 December 2015 6:04 PM
> >> To: Brandon Dale <BDale at kitchengroup.com.au>
> >>
> >>
> >> Cc: xymon at xymon.com
> >> Subject: Re: [Xymon] clientconfig.cfg not getting updated
> >>
> >>
> >>
> >> OK, by adding heaps of debug "WriteLog"s, I believe I've found the
> problem.
> >>
> >> Version 2.04 of the script.
> >>
> >> 2474 function XymonClientConfig($cfglines)
> >> 2475 {
> >> 2476     if ($cfglines -eq $null -or $cfglines -eq "") { return }
> >> 2477         WriteLog "DEBUG - " + $cfglines
> >>
> >>
> >>
> >>
> >>
> >> The above prints "DEBUG - " and nothing more, which tells me that it
> >> is not successfully talking to the server.
> >>
> >>
> >>
> >> The XymonSend function worked though...
> >>
> >>
> >>
> >>
> >>
> >> On Tue, Dec 15, 2015 at 2:47 PM, Colin Coe <colin.coe at gmail.com> wrote:
> >>
> >> HI Brandon
> >>
> >> I appreciate your help with this.
> >>
> >> The log file (c:\xymonclient.log) is being written to and I can see
> >> "Using new remote config, saving locally" however the
> >> clientconfig.cfg while the files time stamp updates, the content
> >> doesn't change.  I ended up putting that section of code in a try
> >> catch block but no error was generated.
> >>
> >> Doing the XymonSend resulted in the whole file being downloaded being
> >> downloaded from the Xymon server.
> >>
> >> I've done the Windows equiv of chmod 777 on the client-local.cfg to
> >> run out permission problems.
> >>
> >> It looks
> >>
> >>
> >> On Tue, Dec 15, 2015 at 1:12 PM, Brandon Dale
> >> <BDale at kitchengroup.com.au>
> >> wrote:
> >>> It should be writing a log file when it runs c:\xymonclient.log, do
> >>> you see that log file being written, does it contain any errors?
> >>> And in xymon are you seeing any of the data make it to your xymon
> >>> server, you should see all the data in the clientlog column.
> >>>
> >>>
> >>> One thing I have done in the past when having issues is use
> >>> xymonsend from
> >>> http://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/xy
> >>> m
> >>> onsend.ps1 to confirm I can talk to the xymon server. You can dot
> >>> source this into powershell and run something like
> >>>
> >>> XymonSend "config client-local.cfg" "xymonservername" >
> >>> c:\temp\client-local.cfg
> >>>
> >>> At least then you can see if you can actually pull down the files on
> >>> that server or not.
> >>>
> >>> Regards,
> >>>
> >>>
> >>> Brandon
> >>>
> >>>
> >>> -----Original Message-----
> >>> From: Colin Coe [mailto:colin.coe at gmail.com]
> >>> Sent: Tuesday, 15 December 2015 12:59 PM
> >>> To: Brandon Dale
> >>> Cc: xymon at xymon.com
> >>> Subject: Re: [Xymon] clientconfig.cfg not getting updated
> >>>
> >>> Hi Brandon
> >>>
> >>> Thanks for the reply.
> >>>
> >>> Yep, read through the doco a couple of times now trying to get this
> >>> working.
> >>>
> >>> 1. Yep, c:\program files\xymon\xymonclient_config.xml exists (and
> >>> xymonclient.ps1 is in this directory) and contains:
> >>> ---
> >>> <XymonSettings>
> >>>
> >>>   <servers>xxx.xx.106.11 xxx.xx.176.11</servers>
> >>>
> >>>   <clientlogfile>c:\xymonclient.log</clientlogfile>
> >>>   <clientconfigfile>c:\program
> >>> files\xymon\clientconfig.cfg</clientconfigfile>
> >>>
> >>>   <clientfqdn>0</clientfqdn>
> >>>   <clientlower>1</clientlower>
> >>>
> >>>   <clientremotecfgexec>1</clientremotecfgexec>
> >>> </XymonSettings>
> >>> ---
> >>>
> >>> 2. On the server (RHEL6.7, Teribithia RPM 4.3.24),
> >>> /etc/xymon/client-local.cfg contains:
> >>> ---
> >>> [powershell]
> >>> clientversion:2.04:http://http.url.to.file/pub/
> >>> tssessions
> >>> adreplicaton
> >>> ---
> >>>
> >>> I've changed "[os=powershell]" to just "[powershell]" and removed
> >>> all but the above (for the powershell client)
> >>>
> >>> 3. I've stopped/started the powershell client and waited for a while
> >>> with no joy.
> >>>
> >>> I've confirmed that the clients can manually download the file.
> >>>
> >>> Not sure what I'm missing here...
> >>>
> >>> Thanks
> >>>
> >>> On Mon, Dec 14, 2015 at 12:30 PM, Brandon Dale
> >>> <BDale at kitchengroup.com.au>
> >>> wrote:
> >>>> If you haven't already I would read through
> >>>> http://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/X
> >>>> y
> >>>> monPSClient.doc
> >>>> it's pretty decent documentation.
> >>>>
> >>>> Try double checking this stuff:
> >>>>
> >>>> 1. Make sure you have copied the .xml file that contains the
> >>>> configuration for the client to the local machine into the same
> >>>> directory where the xymonclient.ps1 script lives
> >>>> http://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/x
> >>>> y mo nclient_config.xml and that this contains a path for the
> >>>> client-local.cfg file and has clientremotecfgexec set to 1 (this is
> >>>> already done by default in the .xml file in that link)
> >>>>
> >>>> 2. Put your settings into the client-local.cfg file on your xymon
> >>>> server, I have put an example below, the valid commands are listed
> >>>> in XymonPSClient.doc
> >>>>
> >>>> [powershell]
> >>>> eventlogswanted:*:250000:warning,critical,error
> >>>> ifstat:ipv4
> >>>> clientversion:2.04:\\somepath\goes\here
> >>>>
> >>>> 3. Wait for or manually run the PowerShell client (by restarting
> >>>> the XymonPSClient Service in windows), you need to do this at least
> >>>> twice as the first time you run it, it will get the commands you
> >>>> have in your client-local.cfg file on your xymon server and write
> >>>> them to the clientconfig.cfg (or whatever you called it in the .xml
> >>>> file) the second time it runs it will start reading it.
> >>>>
> >>>> Note: make sure you read the documentation for the eventlog ignore
> >>>> rules, the syntax is different. You can still use the IGNORE
> >>>> PATTERN but the way you select which eventlogs to check has changed
> >>>> in the powershell client compared to bbwin.
> >>>>
> >>>> Personally I ignore eventlogs in the analysis.cfg on the xymon
> >>>> server rather the in client-local.cfg as you can use regex to match
> >>>> on eventid + Source rather than just the description.
> >>>>
> >>>>
> >>>> Regards,
> >>>>
> >>>>
> >>>> Brandon
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> -----Original Message-----
> >>>> From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Colin Coe
> >>>> Sent: Monday, 14 December 2015 2:48 PM
> >>>> To: xymon at xymon.com
> >>>> Subject: [Xymon] clientconfig.cfg not getting updated
> >>>>
> >>>> Hi all
> >>>>
> >>>> I'm noticing that the Windows Powershell Xymon client isn't being
> >>>> updated to reflect changes in client-local.cfg.  I had thought that
> >>>> changes on the Xymon server to client-local.cfg would result in
> >>>> changes on the Windows clients.  Am I wrong here, and if so, what's
> >>>> the correct way to get these changes propagated out?
> >>>>
> >>>> I'm wanting the following to be pushed out to the clients:
> >>>> ---
> >>>> tail -n 2 /etc/xymon/client-local.cfg [os=powershell]
> >>>> clientversion:2.04:http://benmon1p.scada.horizonpower.com.au/pub/
> >>>> ---
> >>>>
> >>>> clientlocal.cfg contains:
> >>>> ---
> >>>> eventlog:security
> >>>> ignore success
> >>>> ignore Success
> >>>> ignore "The local computer may not have the necessary registry
> >>>> information or message DLL files to display messages from a remote
> computer"
> >>>> eventlog:system
> >>>> ignore "Contact the administrator to install the driver before you
> >>>> log in again"
> >>>> tssessions
> >>>> adreplicaton
> >>>> ---
> >>>>
> >>>> Thanks
> >>>>
> >>>> CC
> >>>> _______________________________________________
> >>>> Xymon mailing list
> >>>> Xymon at xymon.com
> >>>> http://lists.xymon.com/mailman/listinfo/xymon
> >>
> >>
> >>
> >>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20151216/d01c070f/attachment.html>


More information about the Xymon mailing list