[Xymon] Separate column for network interface stats?

John Horne john.horne at plymouth.ac.uk
Mon Jul 23 14:57:01 CEST 2012


On Fri, 2012-07-20 at 10:30 +1000, Jeremy Laidman wrote:
> John
> 
> 
> You need three things to make this happen: a) the ifstat page needs to
> exist, b) svcstatus.cgi needs to know that graphs exist, and c) an
> [ifstat] graph definition must exist in graphs.cfg.
>
Hello,

Thanks for this. However, I should have thought it through a bit more.
What I actually want is to monitor the network interface(s) so that if
the bandwidth gets to, say, 70% utilised then we get a yellow status, at
90% we get red. Similar to the 'cpu' and 'disk' monitoring and the
LOAD/DISK entries in the analysis.cfg file. I was hoping that something
similar was available for the network interfaces (and that we could have
a separate column for 'ifstat' as well).

I suspect I'll need to write a short script to detect the bandwidth
being used by the clients and send the relevant status back to the
server.




John.

-- 
John Horne                   Tel: +44 (0)1752 587287
Plymouth University, UK      Fax: +44 (0)1752 587001



More information about the Xymon mailing list