[Xymon] multiple xymon server IP

Jeremy Laidman jlaidman at rebel-it.com.au
Fri Jul 6 06:30:22 CEST 2012


Joseph, you can override the default source IP address for xymonnet by
adding "--source-ip=ip.add.re.ss".  You would make this change in tasks.cfg.

Any tests that aren't handled by xymonnet (eg custom scripts such as
devmon) would have to do the equivalent.

J

On Thu, Jul 5, 2012 at 11:20 PM, Joseph Acquisto <joea at j4computers.com>wrote:

> Oh, another thought.
>
> I would like the new xymon box to send out tests/ requests on the alias IP.
> (firewall issue again).
>
> If I change the host IP to the alias in the various xymon config files
> (once the
> old box is retired), and restart xymon, am I correct in assuming it would
> use
> the alias for outgoing xymon related stuff?
>
> joe a.
>
> >>> "Joseph Acquisto" <joea at j4computers.com> 07/04/12 6:48 AM >>>
> This is what I had hoped to hear.
>
> Thanks much.
>
> joe a
>
> >>> On 7/3/2012 at 10:13 PM, Isaac W Traxler <traxler at lsu.edu> wrote:
> > Hi,
> >
> > If the two addresses are in the same network, it should be trivial. Just
> > create an ip-alias and go for it. Xymon will not care what interface the
> > packets come in over. It will get annoyed if you have clients transmit
> > every conditon to it twice (I have had that problem every now and then).
> >
> > I curently have a dual homed server. One interface is connected to a
> > subnet inside of campus and the other interface goes directly outside of
> > campus to a state network. My default route is across the external
> > interface with routes defined for all campus address spaces to go over
> the
> > campus interface.
> >
> > All of this works a lot better than expected. A few clients attempt to
> > send reports to both interfaces and for the ones that firewalls do not
> > block, I get double entries -- annoying. Someday I will get all the
> > clients configured properly.
> >
> > Hopefully this info will help.
> >
> > --
> > Isaac Traxler                             AIX,Linux Admin
> > Louisiana State University                traxler at lsu.edu
> > High Performance Computing                225-578-1923
> > LONI AIX Clusters
> > AIX, Linux Support
> >
> > On Tue, 3 Jul 2012, Joseph Acquisto wrote:
> >
> >> Date: Tue, 3 Jul 2012 15:29:45 +0000
> >> From: Joseph Acquisto <joea at j4computers.com>
> >> To: xymon at xymon.com
> >> Subject: [Xymon] multiple xymon server IP
> >>
> >> Built a new xymon server to replace an older box.   We have a DMZ.  To
> avoid
> > doing the paperwork to create new firewall rules I was hoping there was
> a way
> >> to "multi home" the new box so that, once the current one is retired,
> it can
> > assume that IP be happy, from a xymon perspective.
> >>
> >> Simply changing the new server to a single (old box) IP is not feasible
> for
> > reasons I cannot get into.
> >>
> >> Thanks for any pointers.
> >>
> >> _______________________________________________
> >> Xymon mailing list
> >> Xymon at xymon.com
> >> http://lists.xymon.com/mailman/listinfo/xymon
> >>
> >>
>
>
>
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com
> http://lists.xymon.com/mailman/listinfo/xymon
>
>
>
> _______________________________________________
> Xymon mailing list
> Xymon at xymon.com
> http://lists.xymon.com/mailman/listinfo/xymon
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20120706/d85cbdcc/attachment.html>


More information about the Xymon mailing list