[Xymon] xymon 4.3.2 configuration error for rrdtool

Chris.Morris at rwe.com Chris.Morris at rwe.com
Tue Apr 19 16:11:06 CEST 2011


Which version of GNU make are you using. I use GNU Make 3.80 on AIX 5.3
and it works fine!


________________________________

	From: sonal kumar [mailto:nc.sonal at gmail.com] 
	Sent: 19 April 2011 14:57
	To: Morris, Chris (SS-IS); d.altmann at aon.at
	Cc: xymon at xymon.com
	Subject: Re: [Xymon] xymon 4.3.2 configuration error for rrdtool
	
	
	Hi Chris/Altmann 

	Thanks for giving the steps in detail.I made the changes in
Makefile.AIX and it went successfully.below are the last lines of
configure

	Using AIX Makefile settings
	Created Makefile with the necessary information to build Xymon
	Some defaults are used, so do look at the Makefile before
continuing.
	
	
	Configuration complete - now run /usr/bin/gmake (GNU make) to
build the tools
	
	
	But when I gave command gmake it again gives error 
	
	
	# /usr/bin/gmake
	"build/Makefile.rules", line 13: make: 1254-055 Dependency line
needs colon or double colon operator.
	"build/Makefile.rules", line 16: make: 1254-055 Dependency line
needs colon or double colon operator.
	
	
	When I checked in google it says that we need to used gmake,I am
using gmake and already set the envirnoment variables
	MAKE=/usr/bin/gmake
	MANPATH=/krb5/man:
	Make=gmake

	Please suggest

	On Tue, Apr 19, 2011 at 2:46 PM, <Chris.Morris at rwe.com> wrote:
	

		You need to ensure that you are using GNU Make (gmake)
and the Makefile.AIX in the build directory should be :-
		 
		# Xymon compile-time settings for a AIX system
		#
		 
		OSDEF = -DAIX
		 
		# NETLIBS: You may need to add -lresolv or similar to
pick up network libraries
		NETLIBS =
		 
		
		# Compile flags for normal build with gcc
		
		CC = gcc
		CFLAGS = -O -D_REENTRANT $(OSDEF)
		 
		
		# Compile flags for normal build with IBM compiler
		
		# CC = cc
		# CFLAGS = -g -O3 -qstrict -qcpluscmt -D_REENTRANT
$(LFSDEF) $(OSDEF)
		 
		# Compile flags for debugging
		# CFLAGS = -g -DDEBUG -D_REENTRANT $(LFSDEF) $(OSDEF)
		 
		# Mail program: This must support "CMD -s SUBJECT
ADDRESS" to send out a mail with a subject
		# Typically, this will be "mail" or "mailx"
		MAILPROGRAM="mail"
		
		 


________________________________

			
			From: xymon-bounces at xymon.com
[mailto:xymon-bounces at xymon.com] On Behalf Of sonal kumar
			
			Sent: 18 April 2011 14:42
			To: xymon at xymon.com
			Subject: [Xymon] xymon 4.3.2 configuration error
for rrdtool
			
			
			Hi team, 

			I am trying to configure on xymon 4.3.2 on my
AIX server 5.3 version.
			While running the configure.server script ,I am
getting the below error related to rrdtool.


			Checking for RRDtool ...

			./configure.server[76]: -f:  not found.

			./configure.server[76]: -f:  not found.

			Not RRDtool 1.0.x, checking for 1.2.x

			./configure.server[76]: -f:  not found.

			./configure.server[76]: -f:  not found.

			ERROR: RRDtool include files found in
/usr/include, but compile fails.
			
			
			I have already packages related to rrdtool i.e
rrdtool-1.2.30.tar.gz and also have the gcc and other related
prerequisites,as given below,and already declared the environment
variables,libpaths.


			# which rrdtool

			/usr/bin/rrdtool

			root at sapsrp:/

			# whereis rrdtool

			rrdtool: /usr/bin/rrdtool /usr/include/rrdtool
			
			which gcc
			/usr/bin/gcc
	
LIBPATH=/usr/local/lib:/usr/lib:/usr/local/include/
			
			
			Please suggest.
			-- 
			Thanks & Regards
			Sonal kumar N C
			
			

	
************************************************************************
**** 

		The information contained in this email is intended only
for the use of the intended recipient at the email address to which it
has been addressed. If the reader of this message is not an intended
recipient, you are hereby notified that you have received this document
in error and that any review, dissemination or copying of the message or
associated attachments is strictly prohibited. If you have received this
email in error, please contact the sender by return email or call 01793
877777 and ask for the sender and then delete it immediately from your
system.Please note that neither the RWE Group of Companies nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any). 

		 

	
************************************************************************
***** 

		 




	-- 
	Thanks & Regards
	Sonal kumar N C
	
	


**************************************************************************** 
The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any). 

***************************************************************************** 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.xymon.com/pipermail/xymon/attachments/20110419/612a0669/attachment.html>


More information about the Xymon mailing list