[hobbit] BBWin - Monitoring size of Exchange database files

Thomas Leavitt thomleavitt at gmail.com
Sat Aug 29 00:48:00 CEST 2009


Don't know how I missed this the first time around. :) Looks like it
would have done the job with minimal adaptation.

I actually wound up implementing Ray's script today, since it's pretty
clean and simple to understand.

Regards,
Thomas Leavitt

On Mon, Aug 24, 2009 at 6:11 AM, David
Gilmore<david at stenhouseconsulting.com> wrote:
> Go over to deadcat.net and look at Standard Exchange.  You should be able to modify it to in a short time, if you need to modify it at all.
>
> http://www.deadcat.net/viewfile.php?fileid=822
>
> Dave Gilmore
>
>
> -----Original Message-----
> From: Thomas Leavitt [mailto:thomleavitt at gmail.com]
> Sent: Friday, August 21, 2009 8:26 PM
> To: hobbit at hswn.dk
> Subject: Re: [hobbit] BBWin - Monitoring size of Exchange database files
>
> We have one Exchange Server (5.5). We don't need to monitor multiple
> systems. I need something simple that will monitor the size of two
> files (ideally, the combined size, but we can live with checking to
> see that the big one hasn't exceeded 15 GB and the small .5 GB).
>
> 0. I'm not a Virtual Basic programmer... although I do understand
> programming well enough to parse the logic in general.
> 1. Primarily, I don't understand how to adapt this so that it reports
> to Xymon rather than Big Brother... I don't really understand how to
> program external scripts to talk to Xymon in general.
>
> I'm sure I could remedy these issues with enough investment of time,
> but I'm hoping that I don't have to re-invent the wheel here - surely
> someone else has done this? I'm implementing Xymon as a consultant for
> a public agency that slashed their budget for my services by 60% from
> last year, so I don't really think it's worth it for them to have me
> spend even a couple hours of my time and their budget to do something
> relatively simple.
>
> OTOH, looking at it again, I could generalize this and lift the
> reporting code out of some other VBS external script and deal with it
> that way in a a fairly short amount of time. If I don't have a
> response by next Friday, then that's probably what I'll do, then post
> the result back here and up on the various sites. Bill the client for
> an hour and if it takes me two or three because I know jack all about
> this, I'll just chalk it up to a learning experience.
>
> Regards,
> Thomas
>
> On Fri, Aug 21, 2009 at 2:45 PM, Storer, Raymond<storerr at nibco.com> wrote:
>> Thomas,
>>
>> I looked at the script you mentioned below. It is somewhat targeted at a specific environment. What is it about the script you do not understand in order to modify it to work in your environment?
>>
>> Ray
>>
>> -----Original Message-----
>> From: Thomas Leavitt [mailto:thomleavitt at gmail.com]
>> Sent: Friday, August 21, 2009 5:17 PM
>> To: hobbit at hswn.dk
>> Subject: [hobbit] BBWin - Monitoring size of Exchange database files
>>
>> We have an ancient installation of Exchange 5.5, which maxes out at a
>> database size (combined between two files) of 16GB. Apparently, the
>> native bbwin 0.12 client can't monitor these files, because they're
>> always open.
>>
>> There's a BB script here, in VBS, which monitors Exchange files...
>>
>> http://www.deadcat.net/viewfile.php?fileid=629
>>
>> Not sure how to adapt this. Has anyone written anything similar, or
>> done anything similar, that they could send me or point me to, that
>> would let me monitor this stuff in Xymon?
>>
>> Thomas
>>
>> To unsubscribe from the hobbit list, send an e-mail to
>> hobbit-unsubscribe at hswn.dk
>>
>>
>>
>>
>> CONFIDENTIALITY NOTICE:  This email and any attachments are for the
>> exclusive and confidential use of the intended recipient.  If you are not
>> the intended recipient, please do not read, distribute or take action in
>> reliance upon this message. If you have received this in error, please
>> notify us immediately by return email and promptly delete this message
>> and its attachments from your computer system. We do not waive
>> attorney-client or work product privilege by the transmission of this
>> message.
>>
>>
>> To unsubscribe from the hobbit list, send an e-mail to
>> hobbit-unsubscribe at hswn.dk
>>
>>
>>
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>
> This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This message contains confidential information and is intended only for the individual named. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe at hswn.dk
>
>
>



More information about the Xymon mailing list