[hobbit] No SNMP data for devmon template

[Hubbard, Greg L]

You might try the devmon list...

GLH 

-----Original Message-----
From: Martha McConaghy [mailto:URMM at VM.MARIST.EDU] 
Sent: Tuesday, September 09, 2008 8:45 PM
To: Hobbit discussion list
Subject: [hobbit] No SNMP data for devmon template

I've been beating my head against a wall on this and finally admit I
don't have a clue why it is not working.  We're just getting started
with Hobbit, but plan on making it our main monitoring solution.  I've
got devmon running with it and have been able to monitor the devices
that already have templates.  However, some of our devices don't have
templates, so I'm trying to define one for them (Weather Goose
environmental monitors).

To start, I'm just trying to define a simple temperature test.  I can
see that devmon is reading the files and all seems to be OK.  However, I
get the dreaded "No SNMP data found for upsenvTempwx on ..." and the
test does not work.  I can do an snmpget on the same oid and it returns
data with no problem.

I've seen other notes like this in the archives, but never any solution.
I've redone the template files over and over, but nothing seems to make
a dent.
I'll include my files in case one of you can see what I'm doing wrong.
Any advice would be appreciated.

Martha McConaghy
Strategic Planner/Project Manager
Marist College

specs:

vendor  : wxgoos
model   : 3163
snmpver : 2
sysdesc : NETOS 6.0

oids:
upsEnvTempwx    : .1.3.6.1.4.1.17373.2.2.1.5    : leaf

thresholds:
upsEnvTempwx    : red        : 105            : Temperature is very high
upsEnvTempwx    : yellow     : 99             : Temperature is high

message:
{upsEnvTempwx.errors}

Environment status:

Temperature: {upsEnvTempwx} F {yellow={upsEnvTempwx.thresh:yellow}F red=
{upsEnvTempwx.thresh:read}F}

To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk