[hobbit] Novell SuSE SLES 10 client issue.

Great D Dilla great.dilla at gmail.com
Tue Dec 2 05:10:24 CET 2008


A couple of things to check on the client:
[1] Make sure that the hostname of the hobbit server is resolvable from the
client side. Or better yet, use the IP address of the hobbit server on the
config file ==> BBDISPLAY=[IP_or_HOSTNAME_of_hobbit_server].
[2] Check to see if indeed the master is getting files. Usually there are
files in the data directory generated for your client.

Side note:
To configure the hobbit client, simply use "./configure.client" and supply
the IP of the hobbit server. It should work out of the box.

Hope this helps.
 

-----Original Message-----
From: Brian Catlin [mailto:bcatlin at gmail.com] 
Sent: Tuesday, December 02, 2008 10:34 AM
To: hobbit at hswn.dk
Subject: [hobbit] Novell SuSE SLES 10 client issue.

Okay,

I have a few Novell SuSE SLES 10 servers.   I compiled the 4.2 client on one
of them and tried to get it to talk to the Master running on Solaris 9.

The page shows the Master tests, ping, ssh (and they work! - got paged
tonight when the interface on one went AWOL)

On the client side.  In client/tmp = the files are created and ready to send
 The client has a couple probes, and they have good output too.

I can telnet to the master from the clients on port 1984 successfully.  The
client refuses to publish out to the Master.


My bb-hosts has the proper entries for IP and names (tested that 
empirically ) and I have a number of graphs spec'd after trends:*

My sun connections all work fine (Solaris 9 mainly, no 10)

I am wondering if something needs to be changed in the compile to make the
client work on SLES 10.

I am NOT a programmer, so need some help here...

lurch at inorbit.com

To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk





More information about the Xymon mailing list