[hobbit] ifstat and e1000g Ethernet driver

Eric Meddaugh etmsys at rit.edu
Fri Aug 17 13:50:31 CEST 2007


I've adjusted our hobbitclient-sunos.sh script.  Since that command only
works in the global zone (solaris 10 or higher), at the top I have:

ZONE="global"
if [ -x "/bin/zonename" ] ; then
   ZONE=`/bin/zonename`
fi

Then where the kstat command is I have this, which only shows the active
inferfaces on the global zone.  For below solaris 10 it will consider it
a global zone and it works there too: (the LINE= is suppose to be all 1
line).

if [ "${ZONE}" = "global" ] ; then
   echo "[ifstat]"
   LINE=`/sbin/ifconfig -a | /bin/egrep RUNNING | /bin/awk -F':'
'{printf $1"\n"}' | /bin/sort -u | /bin/awk '{printf $1"|"}'`
   /usr/bin/kstat -p -s '[or]bytes64' | sort | egrep "${LINE}"
   #/usr/bin/kstat -p -s '[or]bytes64' | sort
fi





-----Original Message-----
From: Dominique Frise [mailto:Dominique.Frise at unil.ch] 
Sent: Friday, August 17, 2007 06:28
To: hobbit at hswn.dk
Subject: [hobbit] ifstat and e1000g Ethernet driver

Hi,

The solaris regular expression in hobbitd/rrd/do_ifstat.c (Hobbit 4.2.0)
does 
not work for the "e1000g" Ethernet driver found on certain Sparc T2000
system.


Output of the command for ifstat:

$ /usr/bin/kstat -p -s '[or]bytes64' | sort
e1000g0:0:e1000g0/0:obytes64    868907104315
e1000g0:0:e1000g0/0:rbytes64    111199067849
e1000g:0:e1000g0:obytes64       868906791580
e1000g:0:e1000g0:rbytes64       111199060552
e1000g1:0:e1000g1/0:obytes64    0
e1000g1:0:e1000g1/0:rbytes64    0
e1000g2:0:e1000g2/0:obytes64    0
e1000g2:0:e1000g2/0:rbytes64    0
e1000g3:0:e1000g3/0:obytes64    0
e1000g3:0:e1000g3/0:rbytes64    0


Dominique
UNIL - University of Lausanne

To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk





More information about the Xymon mailing list