[hobbit] Hobbit newbie from BB: differences and what may I lose from migrating?

Igor igor.loncarevic at bravostudio.com
Tue Aug 1 23:53:24 CEST 2006


On Tue, 2006-08-01 at 23:12 +0200, Henrik Stoerner wrote:

> > 6) maybe some more router/network monitoring stuff and 
> 
> Hobbit comes with built-in network service monitoring. There is also
> an SNMP add-on which can be used for monitoring devices such as routers.

Is there possibility to graph in/out Bits (64bits counters) from Cisco.
Basically, we use CACTI for graphing gigabit ports on the routers, but
integrating within Hobbit would be nice.

Cacti is pulling via snmp v2 from Cisco some MIBs and then it graphs
with:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Bandwidth  Gi0/24" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
DEF:a="/var/www/html/cacti/rra/bandwidth.rrd":traffic_in:AVERAGE \
DEF:b="/var/www/html/cacti/rra/bandwidth.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00:"Inbound"  \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s"  \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n"  \
LINE1:cdefe#002A97:"Outbound"  \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s"  \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s"  \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s" 

While here, we noticed that hobbit can't graph anything above 100mbit/s for local check, how to overcome this issue? Probably issue with 32bit / 5 min pull.

Best regards




More information about the Xymon mailing list