[hobbit] some larrd issues on hobbit 4.0.3 rc1

Kauffman, Tom KauffmanT at nibco.com
Sun May 1 01:22:56 CEST 2005


These vmstat rrds are from back on larrd 42; just after the change to
accumulate cpu wait. So I'm trying the vmstat recreate to see if the
definitions I've got are severely non-standard (I'd almost bet on it)

If so, I'll see what I need to hack to keep my current data . . .

On the disk space rrds -- this is a lot of wasted activity for us; we
have about 8 filesystems we care about, and my production R3 DB server
currently has 95 filesystems that have been 100% full since creation --
and we add another 10 every 13 months (150 GB -- SAP just *eats* disk).

If I can't suppress the creation, I'd at least like to suppress the
display of the graphs -- they're meaningless noise in our shop.

Not a showstopper for going live Monday, though -- If I can figure out
the vmstat issue.

Tom Kauffman
NIBCO

-----Original Message-----
From: Henrik Stoerner [mailto:henrik at hswn.dk] 
Sent: Friday, April 29, 2005 4:41 PM
To: hobbit at hswn.dk
Subject: Re: [hobbit] some larrd issues on hobbit 4.0.3 rc1

On Fri, Apr 29, 2005 at 01:27:49PM -0500, Kauffman, Tom wrote:
> OK -- I chickened out and haven't thrown the Big Red Switch yet -- but
I
> have hobbit running (display functions only) on my failover system and
> most everything looks good -- except (there's that ugly word) my
vmstat
> graphs for my AIX systems.
> 
> Something is quite wrong, and I'm not sure what to look at.
> 
> Here's what the vmstat bottom feeder ships out:
> 
> aix
>  1  3 2342710   511   0   1   1 2249 14879   0 1964 11870 4215 15 11
31 42
> 
> so cpu_usr is 15, cpu_sys is 11, cpu_idl is 31, and cpu_wait is 42.
> 
> But the vmstat graph is giving me a system of 0.0, user 1670.0, and
idle
> of 2347945.2.

I've looked over the AIX setup for vmstat, and it should parse this
output from the bottomfeeder OK.

Is this RRD file one that you have copied over from the BB/LARRD setup ?
If yes, do the graphs make more sense if you delete the file from
~hobbit/data/rrd/HOSTNAME/vmstat.rrd and have Hobbit re-create the file
(it does that automatically) ?

I'd like to have a look at that vmstat.rrd file to see if the problem is
one of different data-set definitions in the Hobbit vs. LARRD version.
I know the vmstat definitions are different on some systems, but I
cannot remember if I changed them for AIX also.

> Also -- I only get the vmstat graph for AIX - I'm missing vmstat0,
> vmstat2, vmstat3, and vmstat8. Where do I enable the graphing for
these?

The data for them are being tracked, but by default only one vmstat
graph is shown. Add
"LARRD:*,vmstat:vmstat|vmstat0|vmstat2|vmstat3|vmstat8" to the entries
in the bb-hosts where you want these.

> And while I'm at it -- I need to disable the tracking and displaying
of
> disk filesystem usage data -- virtually all my filesystems contain
> Oracle tablespaces and they are 100% full at the OS level shortly
after
> creation -- so I can't see any reason to track them.

There's no way to turn off tracking of the data for disk reports (unless
you configure the client not to send them, of course).


Henrik


To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk





More information about the Xymon mailing list