[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [hobbit] bb-prtdiag.sh - Sun SPARC Enterprise M9000 Server
- To: hobbit (at) hswn.dk
- Subject: Re: [hobbit] bb-prtdiag.sh - Sun SPARC Enterprise M9000 Server
- From: Shaun Phillips <tainted.soul69 (at) googlemail.com>
- Date: Tue, 15 Sep 2009 12:22:50 +0100
- Dkim-signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=googlemail.com; s=gamma; h=domainkey-signature:mime-version:received:in-reply-to:references :date:message-id:subject:from:to:content-type; bh=aE1FV6MGnvkJIptDm5YY6eWFKoR3zmQ+QQhIS4QYuPA=; b=DyzoIjyMtjkFZB7LUND7AAzQwlaqtak8ahLdbRlChSJLO2JqVDqOatiU3M8Eej4Sau 82iBwyqfW0R2YN87M+ZnHxpK1lgDmR/bvbYBwS+j4rVOZHJm+5JHS6ECYkFdQ9gCncrh GOzFyhAdWFzM6mFYrzk5/2gkVTmJseZ7CkW+A=
- Domainkey-signature: a=rsa-sha1; c=nofws; d=googlemail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :content-type; b=iLRmrYW3o4UmkrSnp1Gs6RxfV+WGH3l0SsWXE61ZJa2+b6aiYYaqUpe49E2DfQ2WoM UOlZ7jR9/YduKIwP8lsPjEJI1V2mNaHjFF32M/87DNv1lJWc0srewE6E2JotkwRQnORl J1NQXDCtOGhmH36y9MSU6xPAu7DAnXz9qQADU=
- References: <6457D54DC5088347BF2DB3D2023F9146059193C3 (at) EXCMAIL.gpi.com>
Hi Craig,
I have seen the link referencing the awk or nawk but not sure how it's using
either?
AIs the only reference in the file to awk is the following?
cat bb-prtdiag.sh | grep awk
# You may also need to use /usr/xpg4/bin/awk or
/usr/bin/nawk
Am I being stupid here?
And when is the next version coming out? Is it planned or only when needed?
On Mon, Sep 14, 2009 at 4:33 PM, Craig Cook <Craig.Cook (at) carquest.com> wrote:
> Did you review the instructions in the top of the script? Including the
> tip you may need to run nawk?
>
>
>
> I thought these were in the readme.txt but it is missing. They have been
> in the script since version 4.11.
>
> I thought hobbitmon/xymon debug instructions were also included. I’ll add
> them in the next release.
>
>
>
> # INSTALLATION - Hobbitmon
>
> #
>
> # Step 1 - Copy this script to $HOBBITCLIENT/ext/bb-prtdiag.sh
>
> # Ensure your hobbit user owns the script and is executable
> (chown)
>
> #
>
> # Step 2 - Add the lines mentioned in the bbsys.local section to
>
> # $HOBBITCLIENT/etc/hobbitclient.cfg
>
> # Note: You may have to hard code the
>
> # PLATFORM_SPEC & PRTDIAG_COMMAND variables, or
>
> # do not enter it in hobbitclient.cfg
>
> # You may also need to use /usr/xpg4/bin/awk or
> /usr/bin/nawk
>
> #
>
> # Step 3 - Add this:
>
> #
>
> # [prtdiag]
>
> # ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg
>
> # CMD $HOBBITCLIENTHOME/ext/bb-prtdiag.sh
>
> # LOGFILE $HOBBITCLIENTHOME/logs/bb-prtdiag.log
>
> # INTERVAL 5
>
> #
>
> # to $HOBBITCLIENT/etc/clientlaunch.cfg
>
> #
>
> # You do not need to restart hobbit to activate
>
>
>
>
>
> Craig
>