Re: [hobbit] Installing Hobit Client in HPUX

[mario andre <rower.master (at) gmail.com>]

Hi friends,

I have a HP-UX 11.31 and tried
thehobbit-client-4.1.2p1-3.hpux11.11.re.depot.gz<http://www.razorsedge.org/%7Emike/software/hobbit/hpux/hobbit-client-4.1.2p1-3.hpux11.11.re.depot.gz>
with no success. Can someone help me on How to install hobbit or xymon
client or share a compiled client?

Thanks in advance,

Mario.

On Thu, Apr 3, 2008 at 9:14 AM, Manocchia, Robert <
Robert-Manocchia (at) idexx.com> wrote:

>  Try the following link http://www.razorsedge.org/~mike/software/hobbit/<http://www.razorsedge.org/%7Emike/software/hobbit/>
>
>
>
> You’ll find a link to hpux where there will be around 7 different versions
> of hobbit gzipped depot files. Much easier to install from a software depot.
>
>
>
>             Hope this helps
>
>
>
> Bob Manocchia
>
>
>
>
>
> -----Original Message-----
> *From:* Lars Ebeling [mailto:lars.ebeling (at) leopg9.no-ip.org]
> *Sent:* Thursday, April 03, 2008 2:46 AM
> *To:* hobbit (at) hswn.dk
> *Subject:* Re: [hobbit] Installing Hobit Client in HPUX
>
>
>
> Forgot to say. I am also running HP-UX 11.11
>
>
>
> Lars
>
>  ----- Original Message -----
>
> *From:* Jacob, Davis <Davis.Jacob (at) McKesson.com>
>
> *To:* hobbit (at) hswn.dk
>
> *Sent:* Wednesday, April 02, 2008 8:16 AM
>
> *Subject:* [hobbit] Installing Hobit Client in HPUX
>
>
>
> Hi,
>
>
>
> A quick introduction, I am Davis Jacob a member of the System Engineering
> team.
>
> I am getting a problem when trying to install the client in HPUX machine.
>
>
>
> When I untar the client version, I get this message;
>
>
>
> tar -xvf hobbit_hpux.tar
>
> x ./etc/rc.config.d/hobbit-client, 880 bytes, 2 tape blocks
>
> x ./sbin/init.d/hobbit-client, 3497 bytes, 7 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/bb, 82172 bytes, 161 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/bbcmd, 69884 bytes, 137 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/bbhostgrep, 86268 bytes, 169 tape
> blocks
>
> x ./usr/local/libexec/hobbit/client/bin/bbhostshow, 69884 bytes, 137 tape
> blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-aix.sh, 1452 bytes, 3
> tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-darwin.sh, 1164 bytes,
> 3 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-freebsd.sh, 1462
> bytes, 3 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-hp-ux.sh, 1565 bytes,
> 4 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-linux.sh, 1363 bytes,
> 3 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-netbsd.sh, 1399 bytes,
> 3 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-openbsd.sh, 1396
> bytes, 3 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-osf1.sh, 1346 bytes, 3
> tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient-sunos.sh, 1652 bytes,
> 4 tape blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitclient.sh, 1387 bytes, 3 tape
> blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hobbitlaunch, 78076 bytes, 153 tape
> blocks
>
> x ./usr/local/libexec/hobbit/client/bin/hpux-meminfo, 20732 bytes, 41 tape
> blocks
>
> x ./usr/local/libexec/hobbit/client/etc/clientlaunch.cfg, 349 bytes, 1 tape
> blocks
>
> x ./usr/local/libexec/hobbit/client/etc/hobbitclient.cfg, 1783 bytes, 4
> tape blocks
>
> x ./usr/local/libexec/hobbit/client/runclient.sh, 2962 bytes, 6 tape blocks
>
> x ./usr/local/var/run/hobbitclient-runtime.cfg, 0 bytes, 0 tape blocks
>
>
>
> But I don’t see any installable in it. The HPUX version running is B.11.11
>
>
>
> Can you please help me with this.
>
>
>
> Thanks in advance,
>
> Davis
>
>