[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [hobbit] proc/port error messages error messages
- To: "hobbit (at) hswn.dk" <hobbit (at) hswn.dk>
- Subject: RE: [hobbit] proc/port error messages error messages
- From: "Scheblein, Adam" <adam.scheblein (at) marquette.edu>
- Date: Mon, 11 Sep 2006 09:52:33 -0500
- Accept-language: en-US
- Acceptlanguage: en-US
- Thread-index: AcbVsbNBYzxaf6DlTxiN20rpDr8sFwAAC55w
- Thread-topic: [hobbit] proc/port error messages error messages
Wonderful -- exactly what I was looking for
THANKS!!
Adam
> -----Original Message-----
> From: Iain M Conochie [mailto:iain (at) shihad.org]
> Sent: Monday, September 11, 2006 9:50 AM
> To: hobbit (at) hswn.dk
> Subject: Re: [hobbit] proc/port error messages error messages
>
> On Mon, 11 Sep 2006, Scheblein, Adam wrote:
>
> > Greetings,
> >
> >
> >
> > Recently I have been getting the following error messages in my hobbitd
> > section about my proc column for one of my hosts:
> >
> >
> >
> > Oversize data/client msg from [IP Address] truncated (n=760399, limit
> > 524288)
> > First line: [Hostname]|hp-ux|hp-ux
> > Oversize status msg from [IP Address] for [Hostname]:ports truncated
> > (n=514197, limit=262144)
> >
>
> Yes - this is due to the client sending status messages that are too large
> for the server to accept. The default limit for status messages is 256K
> and clients is 512K; both are not large enough.
>
> You can control this setting by adding values for
>
> MAXMSG_CLIENT
> MAXMSG_STATUS
>
> into the hobbitserver.cfg config file. In my config I have
>
> MAXMSG_CLIENT="2097152"
> MAXMSG_STATUS="2097152"
>
> This may be too large for you though so you should perhaps try smaller
> values first
>
> Cheers
>
> Iain
>
> >
> >
> > Any thoughts??
> >
> >
> >
> > Thanks,
> >
> > Adam
> >
> >
>
> Iain Conochie
> UNIX Systems Administrator
>
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>