Re: [hobbit] 2 graphing questions

["Scheblein, Adam" <adam.scheblein (at) marquette.edu>]

1)  [solved] OK -- I should have looked harder...  I needed vmstat8

2)  When I put things in the "graphs" section it only changes the trends
page.  The whole reason that I originally made the change was so that when I
click into the cpu info page, I would get the vmstat graph, however, I still
wanted la and clock to continue graphing on the trends page.  When I change
CPU back to la both la and clock start graphing again, so I know the
db's/rrd's are not corrupt.

So 1 solved, 1 to go :)

Thanks,
Adam

> -----Original Message-----
> From: Johann Eggers [mailto:Johann.Eggers (at) teleatlas.com]
> Sent: Thursday, September 07, 2006 10:43 AM
> To: hobbit (at) hswn.dk
> Subject: [hobbit] RE: ***** POSSIBLE SPAM ***** Re: [hobbit] 2 graphing
> questions
> 
> Hi,
> 
> the graph definition is all in the hobbitgraph.cfg
> 
> You can change/extend it to fit to your needs...
> 
> Johann
> 
> ________________________________________
> From: Jerry Yu [mailto:jjj863 (at) gmail.com]
> Sent: Donnerstag, 7. September 2006 16:44
> To: hobbit (at) hswn.dk
> Subject: ***** POSSIBLE SPAM ***** Re: [hobbit] 2 graphing questions
> 
> 1) they are already defined in '/etc/hobbit/hobbitgraph.cfg', including
> PI/PO/CS, etc. The one included under 'trends' is 'vmstat'.
> 2) I believe you need to add this 'vmstat3' to GRAPHS= line inside
> hobbitserver.cfg
> 
> revert your change to have 'cpu=la' & you may have to remove the corrupted
> rrd databases as well.
> On 9/7/06, Scheblein, Adam <adam.scheblein (at) marquette.edu> wrote:
> Greetings,
> 
> I know hobbit is sent vmstat info which has page in/out information - is
> it possible to make a vmstat2 graph which has page outs and a vmstat3
> graph which has page ins (or something like that)  and if most of the code
> is already in place, what do I have to change to make this work??
> 
> My next question is when I made a change to my hobbitserver.cfg so that in
> TEST2RRD cpu=vmstat  when I look in trends at load (la) and clock, they
> have stopped graphing...  Why is this happening, and is there anything I
> can do to fix it??
> 
> Thanks,
> Adam Scheblein
> 
> 
> 
> 
> To unsubscribe from the hobbit list, send an e-mail to
> hobbit-unsubscribe (at) hswn.dk
>