[hobbit] SPLITNCV

Stewart, Tom L. Tom.Stewart at landsend.com
Wed Feb 17 00:04:00 CET 2010


> TEST2RRD includes "queue_count=ncv"
> SPLITNCV_queue_count=*:GAUAGE:600:0:U" ( also tried *:GAUAGE )

The word GAUAGE does not look right.

Tom

-----Original Message-----
From: Thomas Eckert [mailto:thomas.eckert at IT-Eckert.de] 
Sent: Tuesday, February 16, 2010 3:48 PM
To: hobbit at hswn.dk
Subject: Re: [hobbit] SPLITNCV


Hi,

have a look at
 	http://www.hswn.dk/hobbiton/2008/10/msg00423.html

or use the current SVN-snapshot of xymon-4.3.0 as that patch was added by the
end of last year
 	http://www.hswn.dk/hobbiton/2009/11/msg00169.html

All the best,

 	Thomas

On Tue, 16 Feb 2010, Steinar M. Skúlason wrote:

> Hi all,
>
> I have create a test that I call queue_count and it monitors the QueueDepth
> of JmsQueue's on Weblogic
> My output is like so :
>
> OnlineQueue      : 5
> TimeQueue        : 0
> ReloadQueue     : 1
>
> Queue names are not always the same between hosts so I'd rather not have the
> queue name as a DS in the rrd.
>
> I put my check in the hobbitserver.cfg
>
> TEST2RRD includes "queue_count=ncv"
> SPLITNCV_queue_count=*:GAUAGE:600:0:U" ( also tried *:GAUAGE )
>
>
> I always get a similar error in rrd-satus.log
>
> 2010-02-16 09:32:05 hobbitd_rrd: Got message 1604
> @@status#1604/calkopas17|1266312725.234658|10.10.10.10:198
> ||calkopas17|queue_count|1266314525|green||green|1266271210|0||0||1266312669|linux|external_servers/Test
> 2010-02-16 09:32:05 startpos 392396, fillpos 392396, endpos -1
> 2010-02-16 09:32:05 Creating rrd
> /var/lib/xymon/rrd/calkopas17/queue_count,ReloadQueue.rrd
> 2010-02-16 09:32:05 RRD create param 00: 'rrdcreate'
> 2010-02-16 09:32:05 RRD create param 01:
> '/var/lib/xymon/rrd/calkopas17/queue_count,ReloadQueue.rrd'
> 2010-02-16 09:32:05 RRD create param 02: '-s'
> 2010-02-16 09:32:05 RRD create param 03: '300'
> 2010-02-16 09:32:05 RRD create param 04: 'DS:lambda:DERIVE:600:U:U'
> 2010-02-16 09:32:05 RRD create param 05: 'DS:lambda:DERIVE:600:U:U'
> 2010-02-16 09:32:05 RRD create param 06: 'RRA:AVERAGE:0.5:1:576'
> 2010-02-16 09:32:05 RRD create param 07: 'RRA:AVERAGE:0.5:6:576'
> 2010-02-16 09:32:05 RRD create param 08: 'RRA:AVERAGE:0.5:24:576'
> 2010-02-16 09:32:05 RRD create param 09: 'RRA:AVERAGE:0.5:288:576'
> 2010-02-16 09:32:05 RRD error creating
> /var/lib/xymon/rrd/testserver1/queue_count,ReloadQueue.rrd: Duplicate DS
> name: lambda
>
>
> So it looks like it's not picking up the "GAUGE" and it's always trying to
> squeeze two results into one rrd where I want a rrd per JmsQueue
>
>
> I'm using xymon 4.3.0-beta2
>
> Do you spot some obvious errors in my config ?
>
>
> Best Regards,
> Steinar M.
>

-- -------------------------------------------------------------------------
| IT-Beratung Eckert  | Hartkirchweg 54          | fon: +49 (0)761/ 594 9898
| Thomas Eckert       | 79111 Freiburg i.Br.     | fax: +49 (0)761/ 594 9899
|                     | Germany                  | http://www.it-eckert.de/



More information about the Xymon mailing list